Partek Offers Versatile Water Jetting System- Literature Available

Imagine a high-pressure water jetting system so versatile that it does everything from removing marine growth on ship hulls to blasting carbonates and hard polymers f r om refinery heat exchanger tubes. The Partek 100 series Liqua-Blaster, ultra-highpressure water jetting unit does that and more.

It takes just one man to operate a Partek Liqua-Blaster. With pressures to 10,000 psi and flows f r om 8.5 to 14.5 gpm, an operator can do the same job normally done by a crew of men with chemicals, hand tools, or sand blasters. High-pressure water penetrates areas where other cleaning tools are impractical. S t a i n l e s s - s t e e l pump components insure maximum resistance against corrosion. Timken tampered crankshaft bearings are designed for 15,000 hours' service at maximum load. A "Fail-Safe" Partek gun provides safe operation, and the trigger guard complies with O S H A r e g u l a t i o n s. Each unit is manufactured at Partek's Houston plant.

There are five 100 series models to choose from. The Liqua- Blaster 105 with 50 hp has pressures to 5,000 psi with an actual flow of 14.4 gpm. The 106 also has 50 hp with pressures to 6,000 psi and an actual flow of 13 gpm. The 106X, 107, and 110 all have 58.8 hp with pressures to 6,000, 7,000, and 10,000 psi, respectively. The actual flow of those models are 14.5, 11.9, and 8.5 gpm.

For more information or free literature on the Liqua Blaster 100, write to Partek Corporation of Houston, Dept. MR, P.O. Box 18312, Houston, Texas 77023.

R&R Marine service water corporation Houston operator